BIGTREETECH TFT35 V3.0 Graphic Sensible Show Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Choose Two Work Modes

Worth: $45.99
(as of Mar 26,2022 06:03:58 UTC – Particulars)

ARM Cortex-M3 collection STM32F207VCT6 chip with 32-bit CPU 120MHz;

Energy Enter：DC5V
SD card logic voltage：3.3V or 5V, assist MEGA2560 motherboard, with greater compatibility
LCD12864 mode makes use of EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD display ports of regular motherboard, EXP3 is the LCD display
port utilized by SKR MINI E3 and SKR E3 DIP;
Notice：1. When utilizing 12864 display mode, join the port EXP1 and EXP2 to the motherboard. (If person makes use of the SKR MINI E3 or SKR E3 DIP, simply join EXP3 to the motherboard.)There isn’t any contact operate on this mode.
2. When utilizing serial port display mode, join with TFT or aux-2 on the motherboard through RS232. This mode has contact operate；
3. Two work modes might be modified by one key. Press the encoder about 3 seconds till the mode choice web page seems, then press the encoder after deciding on the mode.
Bundle Dimensions ‏ : ‎ 6.5 x 3.4 x 1.8 inches; 4.8 Ounces
Date First Out there ‏ : ‎ July 30, 2019
Producer ‏ : ‎ BIGTREETECH
ASIN ‏ : ‎ B07VWF4W3J

1.Improve the firmware by SD card. It’s straightforward and handy to function.This show board has greater compatibility. Customers can choose two work modes,they’re UART serial port display mode and 12864 display mode.
2.Serial port display mode helps two printing modes: SD card and U disk.
3.Reserve WIFI port, and WIFI operate is realized by exterior WIFI module;
4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of computerized shutdown after printing (PS-ON);
5.2 units of UART serial port extension ports are reserved for DIY use.